Our in-house PCB milling service is ideal for simple prototype PCBs. It is not designed for complex circuits requiring high-density routing, fine-pitch components, or advanced manufacturing techniques.
If you would like us to mill a PCB for you, project files must be submitted in one of the following formats: KiCAD, EAGLE, CADSTAR, or EasyEDA.
Types of PCBs the shop is able to produce.
Capabilities & Limitations:
Supports single-sided and two-sided PCBs only.
No solder-resist coating or silkscreening available.
No chemical through-hole plating is available.
Through-holes and vias can be reinforced using copper rivets (EasyContac system).
Four rivet sizes are available, with a maximum of 50 rivets per board.
Minimum trace width: 0.3mm (wider traces recommended for better reliability).
Minimum trace spacing: 0.3mm (larger spacing recommended where possible).
EasyContac Rivet-Style Through-Hole Plating System
When designing your PCB for use with the EasyContac system, please ensure that hole sizes and pad dimensions match the required specifications:
Rivet Size
Internal Diameter
External Diameter
Required Hole Size
Minimum Pad Size
0.6mm
0.6mm
0.8mm
0.9mm
1.4mm
0.8mm
0.8mm
1.0mm
1.1mm
1.7mm
1.0mm
1.0mm
1.4mm
1.5mm
2.5mm (Recommended for through-hole components)
1.2mm
1.2mm
1.6mm
1.7mm
2.7mm
Note:1.0mm rivets are recommended for through-hole components to ensure secure connections and ease of assembly.
For any questions regarding PCB milling compatibility or file submission, please contact us before placing an order.
